Warm-air shower Beluga UPV/S
flush-mounted

Maintenance made even easier
Because of its simple design (modular principle), the Beluga is easy to disassemble. This ensures easy maintenance by the customer. Maintenance costs are reduced. Any repair takes five minutes at most. Thorough cleaning is completed in less than
ten minutes.

NEW! Flush-mounted model now also height adjustable
The depth of installation can be individually adjusted with our proprietary depth adjustment for different finishes (tiles, wood, concrete, etc.)

Gas-pressure spring system
With the high-performance spring system, it is impossible to force the hair dryer up and down. This guarantees durability.

Height adjustment with precision rail guides
The powder-coated full-metal height adjustment system has a range of 530 mm. The precision rail guides are designed to bear a load of 140kg; 10 it is therefore almost impossible to vandalise the height adjustment system.

Power connection
There is a cavity running along the back of the height adjustment system through which the power connection can be laid along the entire length of the height adjustment system. The power cable is concealed on the back and is not visible. Likewise, the internal spiral cable is sealed, increasing the safety of all users.

Crystal mirror
A high-quality, vandalism-resistant crystal mirror is installed as standard in the Beluga V/S and UPV/S. The Beluga V surface-mounted model has no mirror.

Robust plastic hood
The Beluga’s air inlet is at the back, making the plastic hood very robust. A practical innovation: The hood just folds down for repairs and maintenance. The hair dryer stays at the desired height.

High-performance induction motor
The motor unit is sealed so that no dust or moisture can penetrate the electronics and bearings. For long-term, trouble-free operation, dust and dirt have to be removed from the fan regularly. This is an easy process thanks to the modular system.

High-frequency radar with timer and distance setting
World exclusive in the Beluga warm-air showers. The customer can individually set the time (30 sec.– 5 min., factory setting 2.5 min.) and the distance (10–15cm) to suit his or her own needs.

Ceramic heater
The ceramic heater is non-flammable. The 0.7mm heating filament is indestructible. The heater is fitted with double overheating protection, ensuring a high level of safety. However, if overheating does occur, the unit will switch off automatically and start again after cooling with no damage to the unit. Important: Dust must be removed from the unit every 3 months. The heater is easy to clean thanks to its ease of access, ensuring a long lifespan.

Maintenance made even easier
Because of its simple design (modular principle), the Beluga is easy to disassemble. This ensures easy maintenance by the customer. Maintenance costs are reduced. Any repair takes five minutes at most. Thorough cleaning is completed in less than
ten minutes.